Upute za postavljanje i održavanje kvarcne ploče

All engineered quartz contains resins and acrylics that are susceptible to heat, and direct and prolonged exposure to extreme temperatures can damage the surface and cause irreparable damage. Avoid touching hot pans, household items with heating elements, or extremely hot cooking pots or pans. When placing high temperature items, place a heat shield on the surface to avoid direct contact. 

To avoid edge chipping, it is recommended to use a 1/8" radius on all corners and a 3/8" radius on all interior corners. The radius will reduce direct stress on corners that can lead to chipping and breaking. Although KJL Quartz is engineered to withstand almost any installation application. Improper installation can cause the material to crack or even break. It is recommended to install on flat surfaces only, ensuring that all weak points include adequate support or reinforcement. 

S najvećom gustoćom većine kvarca na tržištu, KJL Quartz je izniman proizvod. Njegova niska poroznost rezultira vrlo niskim zahtjevima za održavanjem. Da biste uklonili uobičajene mrlje i prolivene, samo upotrijebite ne{0}}abrazivni sapun ili ocat i vodu. Obrišite površinu vlažnom krpom ili spužvom, po potrebi isperite. Ponovite korake prema potrebi.

For those stubborn stains, ex. gum or pastes, scrape the contents with a plastic putty knife, then scrub the residue with a damp cloth to remove any excess material. Wash surfaces with non-abrasive soap and water as necessary. Soaking the area for ten minutes softens the contents and makes it easy to remove.